AEOTEC Z-Wave Flood Sensor

$80.00

Protect your property from water damage!

The Flood Sensor is designed to the presence of water in basements, yachts and many others residential and commercial applications, providing early warning of developing floods.

The Flood Sensor is designed so that the transceiver is mounted on the wall and the flood sensor is placed in a location where water presence, such as a result of leakage or flooding, is probable. Upon flood detection, the Sensor will beep and flash and report its status to the node ID. Once water is released, it will report to the node ID as well.

1 in stock

SKU: DHS-SNS-FL-AEO Category:

Description

  • The Flood Sensorr is powered by 3 x AA 1.5V alkaline battery. Battery Life About 1 year, @25°C standby mode
    Easy installation.
  • When battery level drops below unacceptable level, the Sensor flashes red LED once every 30 second and reports low battery status to the node ID.
  • Optimized antenna range – 30m(outdoors)
  • 3m cord

 

Technical Specifications

Description
RF Protocol
Z‐Wave
Z‐wave device type
Z-wave multiple level , routing slave
Operating Voltage
USB powered or 1 year battery life on 3AA batteries
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Application
Indoor/Outdoor
Operation temperature
+1~ +40 °C
Weight
270g
Operation Range
Up to 30m when no obstacles
Storage temperature
‐10 ~ 70 °C, humidity 5~95%RH (max)
Housing
ABS
Compliance
Certified for USA, EU and AU/NZ markets (FCC, CE, ROHS, C-TICK)

Additional information

Brand

AEOTEC